...
ltShift - if sub-codes are being used in Rx-Universe, the shift is optional, but if specified it must exist in the shift table.
reverse_breakage_flag - When set to “Y”, the endpoint will reverse the breakage specified by the entries above.
Response:
The response indicates the status of the breakage request.
...
1 = order not found - the specified Rx Order does not exist
2 = order deleted - the specified Rx order has been flagged for deletion
3 = order unvalid - the specified Rx Order has not been validated
4 = order already completed - the specified Rx order has already been completed
5 = order entered is a stock order - the specified Rx order is a stock type order not an Rx order
10 = breakage requires sub-fields - the RxUniverse system requires the use of breakage sub-codes, breakages cannot be carried out with this function.
11 = no breakage entered - no breakage codes have been jsupplied
12 = Right employee with no right breakage - a right employee code is present with no right breakage code
13 = Left employee with no left breakage - a left employee code is present with no left breakage code
14 = a sub-code was entered but sub-codes are not active in Rx-Universe
15 = the specified department code does not exist in Rx-Universe
16 = the specified shift code does not exist in Rx-Universe
17 = the specified position code does not exist in Rx-Universe
18 = department code is required when using sub-codes
19 = position is required when using sub-codes
20 = no lens right eye - the specified Rx order has no right lens to break
21 = no lens left eye - the specified Rx order has no left lens to break
22 = invalid breakage code right eye - the breakage code for the right eye does not appear in the breakage reason database
23 = invalid breakage code left eye - the breakage code for the left eye does not appear in the breakage reason database
24 = invalid breakage code both eyes - the breakage codes for both eyes do not appear in the breakage reason database
25 = invalid employee code right eye - the employee code for the right eye is required
26 = invalid employee code left eye - the breakage code for the left eye is required
27 = invalid employee code both eyes - the breakage codes for both eyes are required
28 = No breakage to reverse - there are no breakages reported on the order