...
- With a Serial Port; A device workstation accepting requests by serial connection must have enough serial ports available for the devices to be connected. This can be accomplished with serial ports directly in the computer or by means of an external multi-port serial adapter. Note that each job tracking scanner used in the lab also must connect to a device workstation by a serial connection. RxUniverse team will support the installation of the following 2 interfacing tools, any other module digital to serial device will be the lab responsibility:
...
- EZ04-WA00-GLB - Digi Connect EZ 4 - serial server, 4-port, with WI-Fi and accessories | Digi International EZ01-MA00-GLB - Digi Connect EZ Mini - serial server, 1-port, with accessories | Digi International
Backup system
OMICS Software Inc. recommends that you have proper backup and recovery procedures in place for your Rx-Universe system and its data files as part of a disaster recovery plan (DRP). You are responsible for providing adequate backups to ensure the recovery of your Rx-Universe system and its data files in the event of a failure of a system failure and or data lost & corruption.
...
- Windows Operating System (32 bit/64Bit); Windows Vista Pro, Windows 7 Pro, Windows 8 Pro, Windows 10 Pro (“Home” versions of Windows XP, Windows 7, Windows 8 and Windows 10 are not supported.)Minimum 4 Windows 10 or above
- Minimum 8 GB of RAM.
- Processor operating at 2.0 GHz or higher (Multiple-core processor operating at 2.33 GHz recommended)
- TCP/IP Lan 100/1000(preferred)Workstations set up as members of the domain.
- A up to date chromium based browser (Chrome, Edge, Chromium, Opera)
- Device stations is the same as the Stand Alone Workstation requirements:
- With TCP/IP you can run normal network cable (RJ45) from your network router to your devices just like connecting a Workstation on your network. This is becoming more and more common with the newer ophthalmic machines.
- With a Serial Port; A device workstation accepting requests by serial connection must have enough serial ports available for the devices to be connected. This can be accomplished with serial ports directly in the computer or by means of an external multi-port serial adapter. Each job tracking scanner used in the lab also must connect to a device workstation by a serial connection.
...