Anchor | ||||
---|---|---|---|---|
|
Search Optifacts User Documentation
Live Search | ||||
---|---|---|---|---|
|
Table of Contents (on this page)
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
Introduction
This document provides instructions for enabling the Job Summary screen in Rx Order Entry.
Procedure
Step 1 - Enable the Custom Configuration
From the Optifacts main menu:
Select Option 3 – Editor Utilities and press enter.
Select Option 6 – Configuration Editor and press enter.
Select Option 6 – Custom Configuration Editor and press enter.
The Custom Configuration Editor displays.
- Press "Q" to Query.
- Ensure that the tables below exist.
If the tables do not exist.
- Press "A" to add a new record.
- Enter all the information as per the example (s) below.
- Press Escape to save the data.
- Type E to exit.
Step 2 – Update the Lab General Configuration
From the Optifacts main menu:
- Select Option 3 – Editor Utilities and press enter.
- Select Option 6 – Configuration Editor and press enter.
- Select Option 4 - Edit Lab General Configuration and press enter.
The Lab General Configuration Editor displays.
- Enable the “PROMPT INSERT INV’ – Type ‘Y’ and press Enter.
- Press F2 to save the data, and you will return to the Configuration Menu.
Default Order Entry View
- Enter a job as usual.
- The Job Summary will display.
To view and, or download these instructions as a PDF file, click on the following document image.
View file | ||||
---|---|---|---|---|
|