...
Specifying horizontal decentration on a digital progressive will be reflected in the values created in the LDS file that is sent to the digital calculator.
In the case of CrossBows and SignetArmorlite, the decentration is sent in the SBSGIN label.
For IOT and Profit, the decentration is sent in the BCERIN label.
For IOT, an additional change is made; the label _DECM is set to 2, to indicate that IOT should use the decentration specified, instead of calculating decentration.
Electronic Remote Order Entry For "Uncut With Frame" and "Uncut Without Frame" Jobs
_JTYPE=1 is Full Job.
_JTYPE=2 by itself is “Uncut With Frame” and you need a trace or the box measurements (A, B and ED).
_JTYPE=2 with “LAYOUT=U” and “_UNCUTDIAM=x;x” is “Uncut Without Frame”:
PATIENT="UNCUT NO FRAME"
_RDATE=20150413
JOB="743746"
_JTYPE=2
DO=B
_LSTYLE=SV;SV
_MATERIAL=P;P
SPH=2.25;1.25
CYL=0;0
AX=0;0
IPD=33;33
_LAYOUT=U
_UNCUTDIAM=65;63
DBL=19
EOJ=END OF JOB
This example will give you an "Uncut with No Frame" with a Crib Diameter of 65mm on the right eye and 63mm on the left eye.