Click here to view the Lab Configuration menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to contact us.

Introduction

This document provides instructions for adding Job Data configurations for the “Specify Crib R” and “Specify Crib L” lite-ups for manual crib specification.

Procedure

Job Data Definitions

From the Optifacts main menu:

Select Option 3 – Editor Utilities and press Enter.

Select Option 6 – Configuration Editor and press Enter.

Select Option 7 – Edit Job Data Definitions and press Enter.

The Prompt Configuration for Miscellaneous Job-Related Data screen is displayed.

• Press “Q” to Query to ensure that the tables below exist.

If the tables do not exist:

• Press “A” to add a new record.
• Enter all the information, as shown in the following 2 diagrams.
• Press Escape to save the data.
• Press “E” to exit.

Job Data Triggers

From the Optifacts Main Menu:

Select Option 3 – Editor Utilities and press Enter.

Select Option 6 – Configuration Editor and press Enter.

Select Option 8 – Edit Job Data Triggers and press Enter.

The Triggers to Cause Prompts for Miscellaneous Job-Related Data screen displays.

• Press “Q” to Query to ensure that the tables below exist.

If the tables do not exist:

• Press “A” to add a new record.
• Enter all the information, as shown in the following 2 diagrams.
• Press Escape to save the data.
• Press “E” to exit.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.