...
If an error message LMS file did does not include the JOB= line (as with Hoya digital), the filename is used to determine the job number, and the job updated accordingly (version 6.39.00).
The option "Send complete path in LDPATH" had not no effect for Zeiss or Essilor jobs (because multiple files can be returned for different devices). This has been correct corrected (version 6.38.05).
Order Entry
Some labs prefer to select the blanks that will be used for a job before the job is entered. A new option has been added to Rx-Universe to make this easier.
First, labs which prefer this method should select the new option on the System Parameters, Order1 tab, called "Select lenses by OPC":
When checked, this defaults new orders to allow the user to scan the blanks by OPC. When the OPC is scanned, the lens style, material, color and pretreatment are automatically populated based on the blank chosen:
The user can still change the lens style, to allow for selection of digital designs (which use the particular blank chosen).
If the user wants Rx-Universe to do blank selection for a particular job (for example, for Essilor or Zeiss digital), they can uncheck the "Select by OPC" box, and select the lens style, material, etc., and allow Rx-Universe to select the best blank to use.
Work Ticket
The CRIB and ELLH are now printed on the work ticket, with the graphic of the frame:
...
In this example,CRIB=55, ELLH=49.
As part of this change, the handling of CRIB and ELLH has been changed slightly. When CRIB or ELLH is sent to a generator, the value can be changed on that device, if the "Crib Allow" fields are set, or if there is a minimum CRIB set on the device setup screen. The value actually sent to the device is stored as the "Actual CRIB" and "Actual ELLH". If set, these "Actual" values will be printed on the work ticket. When a job is recalculated, the "Actual CRIB" and "Actual ELLH" values are reset to 0 (if a job is recalculated, it will be remanufactured, and not necessarily on the same generator) (version 6.39.00).
Job Tracking
The ability to use Motorola LS2208 serial scanners as job tracking scanners has been added. Each scanner is connected to a separate serial port, set up similar to the following:
...