...
Code | Name | LNAM | Pucks | Comments | ||
---|---|---|---|---|---|---|
ID, IDCR | iD-Lifestyle | 457 | uses IDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | ||
iD-Lifestyle CD | 458 | uses IDCDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | |||
iD-Lifestyle-Harmony | 962 | uses IDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | |||
iD-Lifestyle-Clarity | 963 | uses IDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | |||
iD-Lifestyle-CD-Harmony | 964 | uses IDCDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | |||
iD-Lifestyle-CD-Clarity | 965 | uses IDCDPK pucks | not available in 170, 174 - two different lens style codes for different "degression" selection | |||
ECPIQ | Summit ECP IQ | 581 | uses SUMMIT pucks | |||
CDIQ | Summit CD IQ | 582 | uses SUMMCD pucks | |||
AMPIQ | Amplitude IQ | 583 | uses Amplitude pucks | |||
AMPMIQ | Amplitude Mini IQ | 584 | uses Amplitude mini pucks | |||
SV BF IQ | design was listed from Hoya but with no documentation | |||||
ARY11 | Array 11mm | 832 | uses SV pucks | |||
ARY13 | Array 13mm | 833 | uses SV pucks | |||
ARY15 | Array 15mm | 834 | uses SV pucks | |||
ARY17 | Array 17mm | 835 | uses SV pucks | |||
AMPBS | Array Amplitude | 836 | uses SV pucks | |||
AMPMBS | Array Amplitude Mini | 837 | uses SV pucks | |||
SYNC5 | Array Sync5 | 838 | uses SV pucks | |||
SYNC8 | Array Sync8 | 839 | uses SV pucks | |||
TCTBS4 | Array Tact Backside 40 | 840 | uses SV pucks | |||
TCTBS6 | Array Tact Backside 60 | uses SV pucks | coming soon as of Feb 2015 |
...
LMATID Codes
(These codes are set up in table HOYA, you can download this table by importing this table using "Import From Web" in the VCA label tables).
Material | Index | LMATID |
---|---|---|
CR39 | 1.498 | 2 |
CR39 Polarized | 1.498 | 10 |
Transitions | 1.501 | 20 |
Poly | 1.586 | 4 |
Poly Polarized | 1.586 | 30 |
Poly Transitions | 1.586 | 36 |
Trivex | 1.530 | 53 |
Trivex Transitions | 1.530 | 54 |
Trivex Polarized | 1.530 | 169 |
160 | 1.595 | 19 |
167 | 1.66 | 41 |
167 Transitions | 1.66 | 49 |
170 | 1.70 | 42 |
174 | 1.74 | 51 |
...
Setting up Hoya designs
LifeStyle
...
To select the pucks needed for the Lifestyle designs, an alias record from the design to the puck must be set up. In this example, designs ID and IDCR are set up to select IDPK:
Array Designs
The Hoya Array designs are backside progressives, that use any SV puck. While care must be taken to ensure the pucks chosen match the index of refraction supported by Hoya, there are no other specific requirements for the blanks.
...
The alias should be set up to point to the semi-finished blanks:
Setting Up The Hoya Digital Type
The Hoya digital interface is set up much the same as other digital vendors, specifying the local folders for the LDS, LMS and SDF files. The device parameters screen should be set up to use label table ID "HOYA" to properly translate the LMATID codes required by Hoya. Under the digital tab, the flag "Send blank diameter when CRIB=0 or suppressed" must be checked. The Hoya digital calculator cannot process a CRIB=0 value, so, when the calculated CRIB that will be sent to the calculator is zero replace it with the blank diameter instead.
The Hoya calculator also requires _CTO=1 to be sent in the LDS file in order to obtain o360pxbtain thickness results back. Set this up in the same screen, under VCA Over-rides, as follows: