Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Released 18 March 2016

(Includes all changes since version 6.47.00)

Devices

Fixed an issue with the digital processor.  When 10 orders are on hold, it continually goes through those 10 orders and never sends any valid orders (version 6.47.01).

When feasibility is requested for Shamir, send DOSDF=N.  Also, allow LDPATH=?, because that is what is returned sometimes when DOSDF=N, or _PRECAL=1 (version 6.47.02).

For VCA devices, some tracers do not send DBL with the trace.  If an order uses a trace that has DBL=0, then the DBL on the order will be sent to the device (version 6.48.00).

Order Entry

When the tray number is changed on the Order Entry screen, calcs are required so that the OMGEN record gets updated (version 6.47.02).

Modification to order entry.  When a job is completed, delete the tray number record from the GEN record (version 6.47.02).

For Rx-Site, a new "material description" table has been added.  This allows the lab to have specific descriptions for combinations of material, tint and treatment to be shown to Rx-Site users.  For complete details, please see

 

  • No labels