Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

to be released….

Work Tickets

  • New labels have been added that can be used on the “User defined work tickets”. The new labels report the last lens breakage and the number of times that the order went through a lens breakage. The Labels are _RTBKG and _LTBKG

  • New labels have been added to show what printer routing rule was used to route an order. These are _ROUTER (the comment of the routing rule that was applied) and _ROUTEC (a description of the rule)

Blank Selection

  • The existing CRIB safety allowance fields (System Settings:Surf1 and Setup:Lens Styles) has been split into two separate fields, one for finished blanks and a different one for semi finished blanks

Tracings

  • The tracing maintenance program has been enhanced to allow for separate size adjustments for the right/left eyes. Note that left eye adjustment is only available if there are trace points in the left eye.

Remote Orders

When a remote order is received that has bad addon codes, the order will be made un-valid and the bad codes placed in the error messages.

Order entry

When pressing “Calcs” on an order, the addon codes are now verified. If any are bad, the order will be placed un-valid and the incorrect codes displayed in the messages.

Devices

  • Tag FCRV is now sent to Horizons digital as part of the BRS request

  • VCA devices - support for SAFELENS has been added, if an order is marked as using safety thickness, then SAFELENS=1, otherwise SAFELENS=0 (per the DCS standard)

  • No labels