Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

to be released….

API’s

GET/orders/detail

  • the endpoint was returning “unkown job type” for Edge-only and Addon orders. This has been resolved.

  • the endpoint was missing the rtClass field

  • added the shipToMethod label

  • fixed issue that was preventing some of the fields related to each eye from being sent (rt/lt LensStyle, rt/lt LensMaterial, rt/lt Sph, rt/tl Cyl, etc)

  • Added the _FMUPC label

  • the REM label was not sending all the order comments to the endpoint.

POST/orders/add

  • Fix issue with the OCHT fields not being interpreted properly for SV(Single Vision) lenses

  • When a traceID included a SHAP trace, the SHAP was not being passed to the order, resulting in no tracing being used by the order

  • The endpoint was allowing anything to be entered for the job type. This has been fixed to only allow valid job types to be used.

  • The xxMINEDG fields were not being processed correctly. This has been resolved.

  • The endpoint allowed the creation of an addon order with no addons supplied. This has been resolved.

  • Modified to allow an order to be placed “on-hold”

  • Prescribed prism could be entered directionally but not angularly.

POST/orders/addStock -

  • when running the endpoint, the order number assigned to the the order was not being returned when the add was successful

  • Make sure there is at lest one valid item before creating the stock order. Verify that all quaquantities for the valid line items are not 0

GET/customer/read

  • Added the shipping methods for the customer to the endpoint output

Frame Inventory

When the frame module is active, programs and functions that require “frame inventory” will check to see if it’s active before allowing the programs or functions to be accessed or processed.

Order Entry

When edge-only type orders are created, and the pricing module is active, the orders did not price. This has been resolved.

Remote Orders

The remote order process was replacing the Ship-to sent in the remote order file with the one from the customer. The program has been changed to keep a ship-to when sent.

Reports

Orders in process - the report has been modified to replace the patient name with the purchase order number if the system setting, “Use PO num instead of patient in JT e-mails” in the “E-mail” tab is checked.

Shipping Methods

The carrier codes that display based on the shipping method selected were not being properly displayed. This has been fixed.

Additional Documents

Edge-only and Addon orders have been added to the additional documents feature.

Device Interfaces

Device sessions have been modified to automatically reload device configuration every 100 times each device has been checked; this avoids the need to restart the device session after changing parameters for the device interface. Note that this does NOT include changing connection items such as baud rate, stop bit, parity, flow control, or IP address, and will not automatically load a new device connected on a workstation

Packing Slips

Fix a date issue when processing zero date packing slips. Fix an issue with the packing slip template not found when printing the packing slip.

If the packing slip fields “shipping method” and “tracking number” are empty, the corresponding fields were overridden with the empty fields, replacing valid entries.

Frame Tracings

A new field has been added to the screen, “Max Front Curve”. If populated, this will be used in blank selection to limit the front curves of the chosen blanks to not be higher than this value+ 1 dipoter. What this means is that if you set the limit to 0700, then front curves up to 0799 will be allowed.

  • No labels