Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

-Set the SHAM table under “Other” tab, in the Devices settings:

The SHAM table is a standard table containing the codes for LMATID required for the Shamir LDS file (should be up to date).

-On the Digital tab, check the option to accept block size from Shamir – they prefer to select the correct blocking ring for their designs.

Please use this info as a reference because the settings could vary depending on each Shamir Installation. For the Digital Interface setup, I have 3 different settings:

  • No labels