to be released….
Device Parameters
A new checkbox was added to the “Digital” tab, “Send the blank diameter as CRIB when the CRIB=0”. When checked, if the calculated CRIB is 0 (no cribbing) for a digital order, then send the blanksize in the CRIB field when a job is called in an OMA device session
Lens Styles
The “Blend Edges _LTLVL or CCBLND” field in the “Digital” tab is now accessible for all digital lens styles.
Orders
The “Surface options” (F12) screen has been modified for digital orders. If the “Blend Edges” switch in the lens style is checked, the fields in the “Optional” tab “Edge Blending” and “Blend Diam / Blend Bowl” are accessible for all digitial styles. “Previously, these fields were only used for the “Essilor”, “Crossbows” and “A2Vision” digital styles; nothing has changed in the operation of the fields for these digital styles. For all other digital styles, the “Edge Blending” field requires an entry from “0” through “10”. The “Blend Diam / Blend Bowl” field remains the same for all digital styles.
Frame Types
Added groove depth and groove width for frame types with a “Groove” edger code.
Device Interfaces
VCA device - When a device calls for GDEPTH or GWIDTH labels, the sequence of databases that the interface checks for a value is as follows: 1- Pattern database, 2- Frame type database, 3- Material database, 4- Device parameter default value.