to be released …..released 14 June 2021
Devices
The VCA device interface has been modified to only calculate the Loh Prism for a valid eye. One-eye jobs were calculating both eyes and storing an incorrect value for the side that wasn’t being manufactured.
ART blocker - in some cases, the block piece sent to the blocker did not match the block piece printed on the work ticket, this has been resolved. Also, if the CRIB was smaller than the smallest ART block available, no ART block piece was selected, the software has been modified to select the smallest available block piece and increase the CRIB value sent to the devices.
Orders
New fields have been added in the F12/Opt area (Optional fields tab) that allows the user to enter the SEGDHT if available. The SEGDHT fields are only available if a valid trace is associated with the order. When entered, the SEGHT on the Rx entry screen is calculated based on the entered SEGDHT and the trace measurements. When the SEGDHT fields are specified, the SEGHT fields on the Rx screen are disabled.
...
The ability to receive SEGDHT fields has been added. The SEGDHT fields received are only used if a valid trace is associated with the order, otherwise the order is saved as unvalid with an appropriate error message. When valid, the SEGHT for the order is calculated based on the received SEGDHT and the trace measurements.
SEGDHT is the height in millimeters from the top of the segment or fitting cross (if progressive type lens) or the vertical decentration point of a single vision lens, to the point where the vertical line would cross the frame. The position of the line would be vertically from the distance power location (see diagram).
...
When the SEGDHT is supplied, the value is used along with a trace pattern, to calculate the value of SEGHT of a multi-focal lens or the vertical decentration of a single vision lens..
Shipping
The shipping program has been modified to automatically delete the temporary Job Completion file upon exiting (JOBCOMPL.##).
...