released 3 November 2021
Device Interface
When DATA traces are received in remote orders, and converted to INV# traces due to resizing, any frame type on the DATA trace is not retained on the INV# trace.
Frame types cannot be specified on INV# traces, just like they cannot be specified on FTD traces.
If a tracer uploads only FTYP to indicate metal or plastic, the trace will now save the metal or plastic setting, even though ETYP=1 was not received.
When the ART/Nucleo blockers were first released, the intent was to provide a way for prism to be “reserved” for the generator first, so as to minimize the amount of prism blocked on the ART. As part of this, we would display a message at the time of blocking if the total prism on a job exceeded the sum of the prism in the “Blocker maximum prism” and “Generator prism” fields. However, if a lab opted NOT to reserve prism to the generator, but rather, block prism first, then the message would be displayed erroneously. This has been corrected, so the “Too much prism” error will only be generated if the “Generator prism” on the ART blocker interface is greater than 0.
...
Reports
The Inventory Breakage Report has been modified to call a new report format when breakage sub codes are being used. This new format prints the Department code and description, Position code and description, Reason code and description, Shift code and description, each in their own column. It will also now print the Frame Name if one was used on the order.
Rx-Xplore XML Export
Added new columns to the order export:
Right Stock Availability: the count of available inventory for the selected right blank at the moment the blank was picked
Left Stock Availability: the count of available inventory for the selected left blank at the moment the blank was picked
Insufficient Stock?: a flag that is set to true if there was not enough stock available to complete the order when it was entered
Note that the Stock Availability can be negative values if multiple orders are waiting on the same lens
Added lens usage data to the lens export (the last year of usage data for each lens)