to be released ....
Order Entry
Order Entry has been modified to check a new system setting to determine whether or not to allow a zero cylinder axis. This new checkbox can be found on the Orders2 tab in System Settings.
When doing a breakage for a digital job, if the user is prompted to recalculate the job, Rx-Universe now does NOT print a work ticket at breakage if the user requests recalculation; if they do not request recalculation, and the system parameter is set to print the work ticket, then Rx-Universe WILL print a work ticket for the job (with the results of the last digital calculation).
Change to only allow access to the _BLEND field if the lens style is blended (found on the Optional tab of Surfacing Options).
A change has been made to correct a problem where job flow settings (such as AR required, TINT required, etc) would sometimes not get set correctly for orders coming in from other systems.
A SV digital job that had compensated values would print NPD instead of Vdec on the PCL and PCI work tickets, and still show the labels for SegHt and ADD powers. This has been corrected.
Change to give an error message if the ED is less than the A or the B. This is only for "Uncut with frame" and "Full jobs" without tracing.
When using an XML work ticket, labels SLBP (slaboff prism in material index), SLDRP (slaboff reading drop), and _LOHSLBP (slaboff prism in angular degrees) are now supported, allowing these values to be printed on the work ticket.
When base curve charts exist for a specific manufacturer, including ranges not set for the default chart, blank selection was not detecting the extended range on the manufacturer-specific chart, neither when displaying the base curve on the Rx OE screen, nor when selecting the blanks. This has been corrected.
The "Allow Zero PD" flag on System Settings is no longer checked for "Uncut without frame" jobs.
Remote Orders
The VisionWeb remote interface has been enhanced to handle optical center as OC height when received with a single vision job.
...