Digital (or Direct) Surfacing
...
- using .JOB files created by the LDS calculator (LaserOp laser only)
- using .JOB files created by OMICS (LaserOp laser only)
- serial VCA interface
...
- for all surface jobs on Digital Surface generators
- GTHK: send generator thickness with no fining allowance (gen thick = finish thickness) - there is no traditional fining step, the generator thickness should NOT include any fining allowance
- FINCMP: always set to 0 (since fining is not done on these jobs
- for digital surface jobs on Digital Surface generators
- GPRVM: set prism amounts to 0
- LNAM: send actual value required by the particular device (entry taken from new field in lens style database)
- for digital surface jobs on surface blockers:
- AX and GAX: send 0 for the cyl axis (because lens is blocked horizontally across reference marks
- for standard surface jobs on an iFlex polisher:
- GAX: send 0 for the cylinder axis for surfacing
...
Style | Description | LNAM | LDNAM | CORRLEN |
IN16 | Identity Indoor 16 | ID | SD | 9 |
IN18 | Identity Indoor 18 | ID | SD | 11 |
IN20 | Identity Indoor 20 | ID | SD | 13 |
IN | Identity Indoor Auto | ID | SD | — |
IS16 | Identity Standard 16 | ID | MD | 9 |
IS18 | Identity Standard 18 | ID | MD | 11 |
IS20 | Identity Standard 20 | ID | MD | 13 |
IS | Identity Standard Auto | ID | MD | — |
IO16 | Identity Outdoor 16 | ID | HD | 9 |
IO18 | Identity Outdoor 18 | ID | HD | 11 |
IO20 | Identity Outdoor 20 | ID | HD | 13 |
IO | Identity Outdoor Auto | ID | HD | — |
IUSV | Identity Upgrade SV | SUP | FAR | — |
IOFF | Identity Office (NV) | ID | OFF | — |
...
| Wrap and Wrap SV |
|
|
| Default | Min | Max |
Panoramic | 15 (105) | 8 (98) | 30 (120) |
Pantoscopic | 9 (99) | 0 (90) | 12 (102) |
BVD\ RVD | 13 (103) | 10 | 16 |
|
|
|
|
| Fixed\ Variable\ SV AW |
|
|
| Default | Min | Max |
Panoramic | 5 (95) | 0 (90) | 12 (102) |
Pantoscopic | 9 (99) | 0 (90) | 12 (102) |
BVD\ RVD | 13 (103) | 10 | 16 |
...