...
When processing frame files automatically, frame trace file must contain FRAM, FMFR, EYESIZ and BRGSIZ, so that the frame can be saved with the correct naming convention.
ART or Nucleo Blocker
When using an ART or Nucleo blocker, the preferred method of inducing prism is to generate up to 2 degrees of prism first, and block the remainder. To accomplish this, a new field has been added to the Blocking tab of the device setup. Any prism in “Generator prism” will be removed from prism required, and only any remaining prism blocked. If the remaining prism is greater than the “Blocker maximum prism” (on the same tab), then an error will be sent to the blocker, as more prism is required than the equipment can handle (version 6.36.00).
ART and Nucleo block selection can be done in addition to another blocking method set on the Blocking tab in System Parameters. For example, if blocking option “7” (dynamic block selection) is used, the lab can choose to print ART or Nucleo block selection as well, on the work ticket. The job can then be blocked on either the “regular” blocker or the ART/Nucleo, without the job needing to be changed. On the system parameters screen, the additional blocking is set:
The work ticket will then reflect both blocking methods:
Order Entry
When trying to e-mail an invoice and the system variable, Transmission Level, was set to anything other than "Never Transfer the orders", the transfer window would be displayed but the invoice was never e-mailed. This has been corrected (version 6.36.00).
XFD Files
OMGND.XFD
OMFREE.XFD
----------
OMGND.XFD - Added new fields:
GND-GEN-
...
PRISM
...
GND-ALLOW-UNEQUIANGULAR-
...
TRC
...
GND-ALLOW-SHELF-
...
DATA
...
OMFREE.XFD - Added new fields:
WS-FREE-FTP-
...
SW
...
WS-FREE-FTP-
...
URL
...
WS-FREE-FTP-
...
USER
...
WS-FREE-FTP-
...
PASSWORD
...
WS-FREE-FTP-LDS-
...
FOLDER
...
WS-FREE-FTP-LMS-FOLDER