...
For lenticular lenses manufactured on a Schneider generator, if the device identifies itself with a vendor code = "SOM", then the carrier curve is sent in FRNT. Normal behaviour is to send the true curve in FRNT and the carrier curve in IFRNT, but Schneider does not use IFRNT.
When Hoya IDPK products with different treatments/colours were turned on in the lens catalogue, some jobs would not pick the correct puck, due to blank selection stopping prematurely when the colour or treatment changed.
Order Entry
When specifying a specific flat top blank in a remote file, using OPC, for an uncut job without frame measurements, the default decentration was not calculated.
...