Released xxxxxx
...
The graphic on the PCL work ticket did not show correct location of the PRP relative to the fitting cross for certain digital progressive designs. All data for processing the lens was correct, the problem was limited to the graphic on the work ticket. This has been corrected.
When using the XML user-defined work ticket and printing Rx prism, the Rx prism would not be printed if finished (stock) lenses were selected for the job. This has been corrected.
...
Some digital round seg designs would require a larger blank than necessary; this has been corrected.
Changes have been made to accommodate different BCERIN/BCERUP values from the same digital vendor for different devices (for example, laser engraver and mechanical engraving), while supporting the use of "special" labels such as "_BCERUP" for designs from other vendors.
Lens Pick Verification
The Lens Pick Verification entry screen has been made more user friendly.
Inventory
The ability to Import and Export Lens Catalogue records has been added.