Page Comparison

...

Setting Up Equipment Interfaces for Re-Use Server

Nucleo

The basic communication should be set up to use VCA (OMA), port 33512, and the IP of the Rx-Universe server (note, the "Host Upload" interface should also be set up this way):
Image Added

On the setup screen under "Interfaces", set the blocker to use the re-use server:
Image Added

Then, under "Interfaces" and then "block Reuse server interface", set up using protocol 29 with the IP address of the Rx-Universe server:
Image Added

Orbit Generator

The generator will, similarly, be set up to use VCA protocol, port 33512, and the IP address of the Rx-Universe server:
Image Added

Under "Manual mode", then "Machine Setup", then the "Workpiece reception" tab:
Image Added

Then, in the interface setup screen, specify the reUse server protocol, the IP address of the Rx-Universe server, and the LDCS port number::

Image Added