to be released …..
Customer Service
A new hot-key has been added to allow access to the “Change Tray” function. Pressing CTL-T will now access the “Change Tray” function that was in the pop-up menu. The Change tray function has also been enhance by removing the “Save” button and allowing the pressing of the “enter” key at the tray number field to actually start the change tray verification and the change logic.
Digital Processor
The digital processor was causing an “ERROR 41” to occur when restarting after it paused for the daily backup. This has been resolved.
...
When pressing the “Calcs” button, if the order has values in the modified front curves (they can be viewed in the F12/Opt) and the values dont match the “Blank front curves) a warning message will be displayed before the calculations are done. Fixed issue when entering PD values on a straight top lens style. The program would allow for a NPD that was greater than the PD to be entered. This has been corrected.
Remote Orders
When processing an Opti2.8 raw file, only use the supplied frame_sku if it’s greater than 8 characters.
...
New endpoints have been added to return additional breakage information when using sub-codes with breakage:
/breakage/bydept - returns breakage counts by department (not to reason level)
/breakage/codes - returns correct breakage reasons when using breakage sub-codes
/breakage/departments - returns department codes when using breakage sub-codes
/breakage/positions - returns position codes when using breakage sub-codes
/breakage/shifts - returns shift codes when using breakage sub-codes
The orders/pick endpoint has been enhanced to allow order lookup by tray# or PO# as well as the order#
The wip/breakdown endpoint has been modified to no longer include jobs completed today in the WIP total.
Work Ticket Printing
A new screen has been added to allow routing work tickets to particular printers based on their properties.
...