...
If a tracer uploads only FTYP to indicate metal or plastic, the trace will now save the metal or plastic setting, even though ETYP=1 was not received.
Changed ART blocker interface so we do not send "Too much prism" error unless the generator reserve prism field is > 0When the ART/Nucleo blockers were first released, the intent was to provide a way for prism to be “reserved” for the generator first, so as to minimize the amount of prism blocked on the ART. As part of this, we would display a message at the time of blocking if the total prism on a job exceeded the sum of the prism in the “Blocker maximum prism” and “Generator prism” fields. However, if a lab opted NOT to reserve prism to the generator, but rather, block prism first, then the message would be displayed erroneously. This has been corrected, so the “Too much prism” error will only be generated if the “Generator prism” on the ART blocker interface is greater than 0.
...
Reports
The Inventory Breakage Report has been modified to call a new report format when breakage sub codes are being used. This new format prints the Department code and description, Position code and description, Reason code and description, Shift code and description, each in their own column. It will also now print the Frame Name if one was used on the order.
...