Digital-Specific Fields Order Entry
For the most part, entry of an order in Rx-Universe is the same for a digital job as for a toric (non-digital) job.
However, beginning with version 6.46.00, "delta" or "adjustment" values may be entered for a digital job. On the F12 screen from order entry, a new tab called "Delta Powers" is accessible (for digital jobs only):
Values entered on this screen will be sent to a digital calculator using the ADJSPH, ADJCYL, ADJAX, ADJADD, ADJPRVM, and ADJPRVA labels (respectively, reading from left to right on the screen).
Note that these labels must be added to the LDI file for the digital vendor (if they are not already there), and not all digital vendors support the use of these labels. If any particular digital vendor does not support the ADJ* labels, then entering values in this screen will have no effect on the final lenses.
In addition to VCA digital vendors, the delta values (with the exception of the Delta Axis) are also passed to the Old Seiko interface (the Satisloh-specific, non-VCA digital calculator).
For information on setting labels in the LDI file, please refer to 1.1 Use of LDI (initialization files) with Digital Vendors.
Digital Interface From Order Entry
...