...
When design PHEAZ is used on an order, OMICS will check the alias file, and will switch to the PHEAZS design if the seg height of the order is < than the minimum specified for the requested design, and if the add power is less than the maximum add power specified on the alias lens style. Multiple alias records can be specified, to allow checking multiple lens styles (ie several corridor lengths).
DLP polishers
If the DLP polishers are used for Essilor digital, in a non-interfaced mode, and the lab wishes to print the DLP barcode on the ticket, this is now possible.
The code for the DLP polisher is returned in the LMS file using the P1PROC label, similar to the following:
This 18-digit number can be scanned on the DLP in order to set the macros for polishing for the job.
To activate the printing of this field on the PCL work ticket, the "conveyor barcode option" must be set, on the Surf2 screen under System Parameters:
When using the "conveyor barcode option", if the P1PROC option is sent in the LMS file, the DLP barcode will be printed on the work ticket, on the right side, above the conveyor barcode: