Release date: est Sept 2015
(Includes changes since 6.44.00)
Digital Surfacing
Miscellaneous Changes
The LDTYPE label defines the type of surface point file used for a particular design. This could be set manually using the VCA over-ride for a lens style, for example, but now will be automatically set based on the type of file returned by the digital vendor (version 6.45.00).
Digital Interface From Order Entry (version 6.45.00)
...
When using Zeiss Digital with Schneider equipment, for which the alternate interface is to be used, a new option has been added which causes the order number of the job to be appended to the _ALTINTR=1 record sent to the device. This allows either the tray number or the order number to be scanned on the device, and allows the equipment to find the correct file. Because this option is not supported by all versions of software on Schneider equipment, it must be activated by checking the appropriate box when use is desired.
Essilor Eyezen
A checkbox has been added to the lens style Digital tab to require OC height (fitting height) to be entered for a design. This should be set for Essilor Eyezen design(s) (version 6.45.00).
Devices
Fixed issue where NPD was no longer being sent to devices which requested it for IOT digital jobs (version 6.44.01).
...