...
When using Zeiss Digital with Schneider equipment, for which the alternate interface is to be used, a new option has been added which causes the order number of the job to be appended to the _ALTINTR=1 record sent to the device. This allows either the tray number or the order number to be scanned on the device, and allows the equipment to find the correct file. Because this option is not supported by all versions of software on Schneider equipment, it must be activated by checking the appropriate box when use is desired.
Devices
Fixed issue where NPD was no longer being sent to devices which requested it for IOT digital jobs (version 6.44.01).
...
A new checkbox has been added to the Device Interface Parameters on the Other tab; “Send one eye based on barcode” (version 6.44.08).
Work Tickets
A new option has been added to the Surf2 tab of System Settings, to specify that barcodes should be printed for the right and left eyes on the PCL work ticket:
This is needed for devices which must request the data for one eye at a time. When checked, the PCL work ticket will print 3 barcodes in the Conveyor section instead of just 1:
When using this option, the appropriate device interface should be set up to expect the one-eye barcode:
User-Defined Work Tickets
Support has been added for user-defined work tickets created using Satisloh's LOHReport program. For complete details, please see the section "User Defined Work Tickets".
Reports
The Stock Costing Report was modified to use the standard cost (vendor cost 1) instead of the average cost when determining the value of excess stock (version 6.44.02).
...