...
The above setting would make ART blocking the system-wide default for all jobs.
To use BOTH a standard blocking method and ART and/or Nucleo blocking, set the blocking method to the standard blocking method, and then choose the option in the "Select ART or Nucleo blocks" section.
For example, to use blocking method "7" (selection of block using the dynamic selection list), and print both the ART and Nucleo blocks to use, set up the screen as follows:
In this case, Rx-Universe will do calculations based on the standard block selected according to the block selection rules (option "7"), and also pick the correct Nucleo block for the job, and print both on the work ticket, as follows:
The job can then be blocked on either the 58x7 alloy block, the 5-base Nucleo block, or the 5-base Nucleo ART block, and Rx-Universe will adjust its calculations according to which block was used.
If only ART blocks, or only Nucleo blocks, are selected in addition to the "default" both, only the pertinent information will be printed on the work ticket.
Specifying ART or Nucleo Blocking for specific lens types or materials
...