...
- ART-M request data for a job.
- LMS responds with data for both eyes
- ART-M will upload SVAL, AVAL, KPRVA, KPRVM, PIND, GRPVA, GPRVM, _BLKDM, _BLKRD and _BLKCEHI. The data for the RIGHT eye is what was actually blocked; the data for the left eye is a mirror of what was received from the LMS.
- ART-M will request data for the same job a second time; this is used for the left eye blocking. Therefore, the data uploaded for the right eye must be re-sent to the blocker, but the left eye data should be that as calculated by the LMS
- ART-M will upload SVAL, AVAL, KPRVA, KPRVM, PIND, GPRVA, GPRVM, _BLKDM, _BLKRD, and _BLKCEHI with data for the LEFT eye; the right eye data is also present, and is a mirror of what was received from the LMS in step 4.
In Rx-Universe, the device session for the ART-M should be set up with 2.00 degrees of prism to be sent to the generator (with the remainder blocked), and a maximum blocker prism of 4.00. (Note that the generator prism is a guideline; the ART-M will calculate the actual amount of prism to be both blocked and generated). The checkbox indicating the device is an ART blocker must also be checked.
...