...
- Set the “Session Type” to “Remote”.
- Enter the “Device IP”, this is the static IP address for the device and is used to link the TCP/IP device to the correct session parameters for the device.
- “Device Serial #”, this allows you to enter the serial number for the device. Currently this is for informational purposes only.
The device must point to the IP address of the computer running the Rx-Universe TCP/IP device session.
Each TCP/IP device session can service up to 40 connections (devices). You can only have one TCP/IP device session running per computer, but you can have more than one computer running a TCP/IP device session. You can also combine a TCP/IP device session with one or more serial device sessions on the same computer.
...