To be released October 2014
Digital Interface
Manufacturer NOVAR has Manufacturers Novar and Rodenstock have been added as a digital vendor option vendors option (version 6.39.00).
The size of the LNAM on the lens style has been increased from 15 characters to 40 characters (version 6.39.00).
Orders that were marked "ON HOLD" were being correctly processed by the digital processor when tray number was used to refer to the order, but orders identified using the order number were not. This has been corrected (version 6.39.00).
When not using job tracking, it was possible to ship a digital job that had not had valid calculations done (the last time it was submitted to the calculator). This has been changed so that if the job is waiting for calculation results, or if the calculation resulted in an error condition, the job cannot be shipped (version 6.39.00).
When doing digital calculations for a design which selects donor blanks using base curve charts (as opposed to BRS requests), and the base curve charts are set up with different charts for different add powers, and when the job entered has different add powers in the left and right eye, the base curve selection logic could fail, and not select a base curve to use. This has been corrected (version 6.39.00).
Handling of lenticularization / edge blending for IOT designs has been enhanced. Any IOT design that contains "_L" in the LNAM will allow entry of the "Blend Diam / Bowl Size" on the F12 screen (previously this was implemented only for designs that contained "_LP" in the LNAM) (version 6.39.00).
Work Ticket
The CRIB and ELLH are now printed on the work ticket, with the graphic of the frame:
Inventory
A new field has been added to the inventory browse grid to allow quick look up by OPC.
...