...
The “Surface options” (F12) screen has been modified for digital orders. If the “Blend Edges” switch in the lens style is checked, the fields in the “Optional” tab “Edge Blending” and “Blend Diam / Blend Bowl” are accessible for all digitial digital styles. “PreviouslyPreviously, these fields were only used for the “Essilor”, “Crossbows” and “A2Vision” digital styles; nothing has changed in the operation of the fields for these digital styles. For all other digital styles, the “Edge Blending” field requires an entry from “0” through “10”. The “Blend Diam / Blend Bowl” field remains the same for all digital styles. If the “Fitting instrument information VMAP” switch in the lens style is checked, the fields in the “Optional” tab “Fitting instrument information” is accessible. These options now set the VC DCS labels CCBOWL and CCBLND as well as the labels previously supported.
When doing a remake from an order that had a trace attached, if you clicked the "Calc" button on the new order before assigning an order number to it, it would blank out the trace name field. This has been corrected.
Remote Orders
When receiving a remote order using the VCA labels, if the VMAP field is supplied, it will be stored on the order. If the desired lens style requires the VMAP field and it is not supplied, the order will be marked as unvalid.
...